NEW PRICING IN EFFECT 01/01/2015 - CONTACT US FOR CORRECT PRICING.
MSA 4x4 Canvas Seat Covers
*Free Shipping to Metro and Major regional areas only. If unsure about your area classification, or are in a remote area contact us for a freight quote*
We at MSA 4x4 are travelling adventurers just like you! We work hard for our travels just like you! We have crazy kids just like you! We want to protect our 4wd’s and products just like you! We design, use and abuse our seat covers so we can provide you with the most comfortable, best fitting and toughest seat protection available. Once you have enjoyed our seat covers you will agree!
Why do we do it?
WHY CANVAS? Because poly/cotton canvas is a tough, durable, waterproof, breathable, natural feel that will outlast any other fabric many times over.
WHY POLY/COTTON LINED? While canvas is a waterproof, breathable, tough, long lasting fabric that can withstand loads of abuse, it can also abuse your vehicles nice soft seats, so to protect your seats against any damages. MSA 4x4 uses a soft poly/cotton fabric layer as a barrier between the canvas and the soft seat fabric.
WHY POLYESTER/COTTON BLEND CANVAS? Ask any manufacturer of quality canvas products in Australia the same question, whether it be tents, swags or camper trailers, they will tell you the same thing. Although cotton feels natural and breathes in its 100% state, it has no strength, no fade resistance, no ruggedness, it will shrink, it needs the blend of polyester yarn to give it its strength, durability and toughness we require for everyday use. Without polyester it will have no reasonable service life. You might as well put a “T-Shirt” on your seats.
WHY DOUBLE LAYERED 12 OUNCE CANVAS FOR MSA? We want you to be comfortable so we use a double layered canvas on the outsides where the high wear occurs & a single layer in the centre. Although extremely tough our covers do not feel hard and crusty like yesterday’s canvas.
WHY DUPONT TEFLON REPEL? Because it is the best! We want the very most from our seat covers so we decided to impregnate our canvas with DuPont Teflon Repel during the fabric manufacturing process. This gives an extra protection barrier all round while still remaining just as breathable!
WHY ADR CRASH TEST CERTIFIED? Because and illegal, cheap and easy disclaimer isn’t going to help you after the airbags don’t deploy as the manufacturer intended them to! All our ADR Certified seat covers have completed and passed vigorous crash testing. No cheap piping! No elastics! Elastic is great for ease of manufacture but under constant tension it WILL give way. Click here to download ADR Airbag Certification Certificates.
EXTRA LAYERS on high wear areas!
MAP POCKETS as standard! All seats, armrests and drink holders WILL work as standard!
All this combines to provide you with the best quality seat covers your hard earned money can buy. Oh yes, did we mention our seat covers are not just tailored they are an identical copy of your seat and therefore without a doubt, the best fitting, non-creasing covers available anywhere! Ask anyone who has ever used them and they will testify.
Posted by Wayne Smith on 25th Feb 2015
I bought a set of MSA seat covers for my new Amarok. With my wife's thin lady hands :-), it took us 25 mins to fit it all. One trick is to raise the front seats as high as they go. One strap snapped (stitching gave way) when my wife was tightening a strap on the rear seat cover but it still fits OK. It all fits well and looks great. I'll tighten over time as the material settles in but it should protect the leather seats for the life of the car. It is very well made.
Posted by Unknown on 7th Aug 2014
A quality fabric and fit. The stitching on one of the strap buckles had pulled out when the product came new out of the box. Seat back velcro section is difficult to fit
Posted by John on 1st Apr 2014
These seat covers are very well made and the quality is easily seen.
The fitting of the front seats is a little difficult, but we eventually managed, but once on the fit was excellent.
The rear seats were alot easier to fit, and again the final look of them was great.
I can very highly recommend these seat covers!
Posted by Unknown on 25th Feb 2014
good feel and alright fit. Had trouble with the base of the front seats as there seems to be no way of passing the velcro straps under the seat of my trendline amarok
Posted by Brendan on 5th Sep 2013
Really good fit and quality product! Best price I could find.
Posted by Unknown on 3rd Dec 2012
The pockets on back of front seat covers could be made a little deeper - very tight to squeeze things into. On a positive note, they are a very nice fit and look great. I also agree with the best price on the net and fast postage!
Posted by Mark on 14th Aug 2012
This is the second set of MSA seat covers I have had - first ones were on my 07 hilux for 4+ years and still looked great when I sold it - they were easy to keep clean and didnt seem to wear much at all - other than get a bit shiny in high use spots. These ones look even better - new colour matches my new hilux interior nicely. They are a bit difficult to fit - mainly the front seat bases - but once on they fit reasonably tight and feel nice - very sturdy tough fabric that is still nice to sit in. Will see how these ones go as they wear in, but very happy with them so far!
Posted by Unknown on 13th Aug 2012
excellent fit Picture on AusAmarok
and the best price on the net with fast postage
Thank you very happy
Posted by Unknown on 3rd Aug 2012
I am pleased with how the covers feel, I was expecting them to fell rougher. Putting them on was a bit of a challenge, especially lining up where the seat belt connectors come through the holes. Overall I am happy with the look and feel , I hope they "settle in" to the seats over time as the material gives a bit. The quality of the construction seems great and I like the look compared to the toyota alternative
Posted by Peter Watts on 22nd May 2012
The material quality looks and feels great.
Fitting of some items, mostly the front seat bases, is very difficult if not impossible!
My Trendline has the drawers under the front seats and I can find no way to connect the two lateral velcro straps. There is just no room for hands under there. As a result they look very ordinary - like a loose fit cover - and are slowly but surely working their way across towards the drive train tunnel.
The backs of the front seats fitted up nicely and haven't moved at all so far.
The rear seat bases were relatively easy and look great apart from not being able to use the pink bungy cords to lock them down. Doesn't matter.
The rear seat back seemed simple and straight forward to fit until I had to line up the gaps in the cover with the locking pins on the seat back. Ended up having to deform the shape of the actual seat back to get these to line up.
The head rest covers looked totally crap and I have removed them. Admittedly a hard shape to work with and I don't think MSA will find it easy to get that bit right.
Over all the tolerances seem to be a bit too tight with regard to the headrest holes, etc., but are generally pretty good (except for the rear seat lock pin holes which are a good 20mm out of position).
Having said all that, I am still very happy with the overall quality of these covers.
Just a little bit of tweaking required as well as a better way of doing the front base lateral straps and this will be a brilliant product. Oh, and the head rest covers .......